Odhav, Ahmedabad, Gujarat
GST No. 24ABAFM3695C1ZH
Call 08047639973 84% Response Rate
Minimum Order Quantity: 500 Kg
Product Brochure
Is It Customised | Customisation |
Finishing | Matt Finished |
Metals | Iron |
Surface Pre-Treatment Process Lines | All Surface Treatment |
Applications | All |
Color | Black |
View Complete details
Minimum Order Quantity: 500 Kg
Product Brochure
Service Location | AHEMEDABAD |
Coating Method | Chemical and electrochemical techniques |
Payment Mode | AT TIME OF DELIVERY |
Application Method Of Coating | Roller |
Service Charges | 18 % |
Thickness | 2 MTR |
Technology | ELECTROLYTIC |
Tolerances | 0.2 MM |
Zinc Phosphate Coating Services is applied when increased corrosion resistance is required. Zinc phosphate withstands 240 hours of neutral salt test.A wide range of coating weights may be obtained : from very thin fine crystal films to heavy deposits with weight up to 4 g/ft2 (40 g/m2).
The coating color is gray of different tins : from light to dark. Finer zinc phosphate crystals produce darker color. Dark gray color is also characteristic for the high carbon steel substrates.
Zinc phosphate coatings may be applied by using immersion or spray technique.
Light and medium weight zinc coatings do not require substrate surface activation. The substrate surface should be acid activated prior to heavy coating deposition. Zinc phosphate is used not only for non-coated Steels and cast irons but also for galvanized (zinc plated) steel parts.
Size - Phosphating Zn & Mn (2000 Ø X 3000 mm Length)h
Additional Information:
View Complete details
Minimum Order Quantity: 500 Kg
Product Brochure
Applications | Fixings and fasteners |
Surface Pre-Treatment Process Lines | Immersion Iron Phosphate |
Metals | Iron |
Service Location | AHMADABAD |
Types Of Phosphate Coating | Manganese Phosphate Coating |
Manganese phosphating is applied when wear resistance and anti-galling properties are required. Manganese phosphate also possesses the ability to retain oil, which further improves anti-friction properties and imparts corrosion resistance to the coated parts.Magnesium phosphating typically have black color with a slight brown tint, intensity of which depends on the content of manganese oxide in the coating. Manganese phosphate is applied by immersion method. The substrate surface should be acid activated prior to coating. The coating weight is typically in the range 500-4000 mg/ft2 (5-40 g/m2). Because of their good anti-friction properties and corrosion resistance iron phosphate coatings are widely used for combustion engine parts (camshafts, piston rings, cylinder liners, gear parts), weapon mechanisms and other parts working with friction. Oil treatment is commonly employed as post treatment.
Size- 1000 Ø X 3000 mm Length
View Complete details