Maharsh Metal Heat Treatment

We also deal in all kinds of phased array ultrasonic testing  in Chemical Processing and all types of Engineering products & works as per your requirements with the highest quality assured, under supervision of highly skilled and experienced professionals.

Please Find Attachment about our work and us as below.

Additional Information:

• Item Code: 85
• Production Capacity: 100
• Delivery Time: 1 day

• Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements. Ultrasonic inspection can be used for flaw detection/evaluation, dimensional measurements, material characterization, and more. Ultrasonic testing is carried out using an ultrasonic flaw detector and an ultrasonic probe. In the inspection, ultrasound is sent into the area of interest by straight beam or angular beams.
• The ultrasound can be reflected from an interface (ex. Discontinuity) and received by the probe. The reflected ultrasound is displayed on a cathode ray tube screen in the flaw detector and the signal can be analyzed. This method is good for detecting internal discontinuities. Ultrasonic can be done on all type of materials and forms like casting, welding , forging, rolled products and composite.
• The advantages of Ultrasonic Testing is it provides instantaneous result, Equipment can be highly portable or high automated, Nonhazardous, Highly accurate, minimum part preparation is required and low cost.We have a team of qualified and experienced Engineers. We provide high quality services for various industries like Casting, Forging, Fabrication, Piping, Boilers, Power plant and Refineries. We are equipped with advance and computer controlled equipments for service.

We offer following corrosion tests at our lab:

•  Flaw Detection for Casting, welding, forging, rolled products, Piping Etc. with In built DGS, AVG, DAC, API 5UE and AWS D1.1 software with recording facility.
•  Thickness Measurement with high resolution upto 0.001mm.
•  Thru-Coat Measurement.
•  Corrosion Mapping for Heat exchangers/Boilers Tubes.
•  Oxide Scale Measurement for Pipes & Tubes.
•  Thickness measurement at elevated Temperature upto 500 °C for Heat exchangers tubes and many more component.
•  Thickness Measurement on outer and inner surface of ‘U’ portion of heat exchanger tubes.

Additional Information:

• Item Code: 3949
• Production Capacity: 30 DAYS
• Delivery Time: 2 DAYS
• Packaging Details: AS PER REQUIRED

Positive material identification (PMI) is used to analyse and identify material grade and alloy composition for quality and safety control.
A rapid, non-destructive method, positive material identification is performed on a wide range of components and assets, and provides a semi-quantitative chemical analysis. It is used for both material verification and identification.

 
The method is utilised for quality control and safety compliance, and is an integral part of both production and asset integrity management across many industries including oil and gas, power, chemical, pharmaceutical, nuclear, aerospace and fabrication.
 
Positive material identification can prevent potential product failure in manufacturing. At oil and gas, power generation and pharmaceutical plants, pre-service and in-service inspection of critical components and welds with PMI can prevent breakdown and its costly consequences.   
 
PMI can:

• Ensure products/components have been manufactured using the correct alloy
• Find potentially mixed-up alloys
• Identify if the wrong material has been used
• Ensure material conforms to the correct standard and specification (both customer and industry)
• Ensure welded components have used the correct filler material

Positive material identification is performed using either of the two techniques below:

• X-ray Fluorescence (XRF) analyser: This is the most common method and the portability of the hand-held equipment allows Intertek to perform PMI on-site at our customers’ premises. The device scans the metal material and identifies its key elements. However, it cannot detect carbon and some lighter elements and is not suitable for identification of pure carbon steel materials.
• Optical Emission Spectroscopy (OES): This method can detect almost all types of elements including carbon and lighter elements and carbon steel. Although not as portable as XRF analysers, the equipment can be transported to sites and used at high elevations with proper lifting arrangements.

Intertek’s highly experienced PMI inspectors can provide on-the-spot results followed by the certification of results in a written report.  We also interpret and advise on the results.
 
In addition, our responsive turnaround times ensure that we meet your production or inspection schedules and if further analysis is required, Intertek can provide the fully quantitative laboratory techniques to corroborate findings.
 
By coming to us for your positive material identification, you can be assured of a rapid, reliable service with accurate results that will provide Total Quality Assurance that your products or assets meet the required quality and safety standards in today’s markets and industries.

Additional Information:

• Item Code: 1303
• Production Capacity: 10
• Delivery Time: 1 DAYS

MMHT provides a complete reliable, high quality materials testing services committed to maintaining your precise specifications while meeting your scheduling requirements. We enjoy the range of prime garnered by our esteemed customers, which means you can rely on a wider range of testing services for metals and alloys.
Our satisfied clients have been and continue to be our largest source of new clients. Their referrals and continued patronage are the best indicators of our performance. We look forward to providing you with the same degree of performance, quality and customer service.
Examples of failure analysis are almost everywhere. Whether it is a minor maintenance failure or a disaster of national significance, anyone can learn from analysing mistakes. We check and analyse the following parameters

Mechanical properties
Microscopic product features

Flaws and defects Material composition
Corrosion susceptibility

Steel/alloy identification
Metallography

Fractography
Grain size measurement

Impurity inclusions
Casting defects identification

Secondary phase distribution and identification
Micro indentation hardness

Tensile, compression, and flexural strength
Corrosion testing

Coatings analysis
Failure analysis.

We also deal in all kinds of Special NDT Services in Chemical Processing and all types of Engineering products & works as per your requirements with the highest quality assured, under supervision of highly skilled and experienced professionals.

Please Find Attachment about our work and us as below.

Additional Information:

• Item Code: 84
• Production Capacity: 100
• Delivery Time: 1 DAY

We also deal in all kinds of onsite hardness testing  in Chemical Processing and all types of Engineering products & works as per your requirements with the highest quality assured, under supervision of highly skilled and experienced professionals.

Please Find Attachment about our work and us as below.

Additional Information:

• Item Code: 83
• Production Capacity: 100
• Delivery Time: 1 DAY

We also deal in all kinds of liquid penetrant testing services  in Chemical Processing and all types of Engineering products & works as per your requirements with the highest quality assured, under supervision of highly skilled and experienced professionals.

Please Find Attachment about our work and us as below.

Additional Information:

• Item Code: 81
• Production Capacity: 100
• Delivery Time: 1 DAY

• Magnetic Particle Inspection (MPI) also sometimes called as Magnetic Test (MT) is a non-destructive test method for the detection of surface and sub-surface discontinuities in ferrous materials. The test method involves application of magnetic field externally or applying electric current through the material which in turn produces magnetic flux in the material. Simultaneously, visible ferrous particles on sprinkled or sprayed on the test surface.
• The presence of a surface or near surface discontinuities in the material causes distortion in the magnetic flux which in turn causes leakage of the magnetic fields at the discontinuity. The magnetic particles are attracted by the surface field in the area of the discontinuity and adhere to the edges of the discontinuity appearing the shape of the discontinuity.
• We have qualified and trained engineers for Magnetic Particle Inspection. We offer Magnetic Particle Testing with all Technique in our laboratory or as per customer premises. We have prod type machine with all accessories from which we can test in both direction( Longitudinal & circumferential) for different sizes jobs like crank shaft, piston rods, heavy thickness pre machining casting and forgings and Welding in order to detect surface and subsurface discontinuities. We have also permanent magnet and Electromagnetic yoke type machine for machined component and welding. We are also can test with Visible dry particles, Visible Wet particles and fluorescent wet particles.

NDT PROCEDURE PREPARATION AND APPROVAL

·         RADIOGRAPHY TESTING

·         ULTRASONIC TESTING

·         MAGNETIC PARTICLE TESTING

·         LIQUID PENETRANT TESTING

·         VISUAL TESTING

·         EDDY CURRENT TESTING

·         LEAK TESTING

·         INFRA RED / THERMAL TESTING

·         MAGNETIC FLUX LEAKAGE TESTING

·         WELDING INSPECTION : WPS, PQR, etc..

Additional Information:

• Item Code: 1314
• Production Capacity: 350
• Delivery Time: 1 DAYS

We also deal in all kinds of visual inspection services  in Chemical Processing and all types of Engineering products & works as per your requirements with the highest quality assured, under supervision of highly skilled and experienced professionals.

Please Find Attachment about our work and us as below.

Additional Information:

• Item Code: 82
• Production Capacity: 100
• Delivery Time: 1 DAY